Soundoff Signal P Serie Instrucciones De Montaje página 6

P SERIES 6X4 WARNING LIGHT
FUNCTION TABLES
The functional operation of the LED module can be changed while applying the +V to the Red wire with the Black wire connected to ground. When the light is flashing, momentarily connect the White wire to ground for >4S and <5S (light
will go steady high, steady low, off, steady high, steady low) then release. The function table will now advance to the next table (table 1 to table 2, table 2 to table 3, table 3 to table 4, or table 4 to table 1. In the case that the custom table is
programmed, the order is 1 to 2, 2 to 3, 3 to 4, or 4 to 7 (custom), and 7 to 1.) Repeat above process until required function table is active.
EXAMPLE: If the light is using Function Table 2 with the Orange wire to power, which steady burns color 2, and you then apply the White wire to ground,
to change the Function Table to number 3, this would cause the light to start flashing dual low power.
RED
+9-32V
+9-32V
+9-32V
+9-32V
WIRE
RED ORANGE
+9-32V
+9-32V
+9-32V +9-32V
+9-32V
+9-32V
+9-32V +9-32V
1.800.338.7337 / www.soundoffsignal.com
6
FUNCTION TABLE 1
WIRE LIGHT
ORANGE WHITE SINGLE
FLASH
+9-32V CRUISE STEADY COLOR 2
+9-32V FLASH STEADY COLOR 2
+9-32V NO OP
+9-32V LOW PWR FLASH FLASH COLOR 1
+9-32V +9-32V CRUISE FLASH COLOR 2
+9-32V +9-32V LOW PWR FLASH
FUNCTION TABLE 3
LIGHT
WHITE SINGLE
FLASH FLASH DUAL
LOW PWR FLASH FLASH DUAL LOW PWR
LOW PWR FLASH FLASH DUAL LOW PWR
+9-32V NO OP
+9-32V LOW PWR FLASH FLASH DUAL LOW PWR
+9-32V LOW PWR FLASH FLASH DUAL LOW PWR
+9-32V LOW PWR FLASH FLASH DUAL LOW PWR
The light will "wink" to indicate which of the new tables is selected.
WIRING AND TABLE INFORMATION (CONT.)
WIRE
RED ORANGE
DUAL
+9-32V
FLASH DUAL
+9-32V
+9-32V +9-32V
NO OP
+9-32V
+9-32V
FLASH DUAL +9-32V +9-32V
WIRE
DUAL RED ORANGE
+9-32V
+9-32V
+9-32V +9-32V
NO OP
+9-32V
+9-32V
+9-32V +9-32V
AFTER SELECTION
Custom table will "wink" 7 times.
FUNCTION TABLE 2
LIGHT
WHITE SINGLE DUAL
FLASH FLASH COLOR 1
STEADY COLOR 1 STEADY COLOR 2
STEADY COLOR 1 STEADY COLOR 2
+9-32V NO OP NO OP
+9-32V CRUISE FLASH DUAL
+9-32V STEADY COLOR 1 STEADY COLOR 2
+9-32V STEADY COLOR 1 STEADY COLOR 2
FUNCTION TABLE 4
LIGHT
WHITE SINGLE DUAL
+9-32V
+9-32V
+9-32V
+9-32V
6X4 POLYCARB_WARNING 0422 REV C