Stihl SH 85 Manual De Instrucciones página 15

During Operation
The green light emitting diodes glow
continuously or flash to indicate the state
of charge.
80 - 100 %
60 - 80 %
40 - 60 %
20 - 40 %
0 - 20 %
If the light emitting diodes on the battery
flash or glow red – see "If the red light
emitting diodes glow continuously /
flash".
BGA 85
All manuals and user guides at all-guides.com
If the red light emitting diodes glow
continuously / flash
A
B
C
D
A 1 light emitting
diode glows
continuously
red:
B 4 light emitting
diodes flash red
C 3 light emitting
diodes glow
continuously
red:
D 3 light emitting
diodes flash red
1)
When charging: Charge process
starts automatically after the battery
has cooled down / warmed up.
2)
3)
4)
Battery is too
1) 2) 1)
hot /cold
Malfunction in
3)
battery
Power tool is too
hot – allow it to
cool down.
Malfunction in
4)
power tool
During operation: Power tool cuts
out – allow battery to cool down; it
may be necessary to take the
battery out of the power tool for this
purpose.
Electromagnetic interference or
malfunction. Take the battery out of
the power tool and refit it. Switch on
the machine – if the LEDs continue
to flash, the battery has a
malfunction and must be replaced.
Electromagnetic interference or
malfunction. Take the battery out of
the machine. Use a blunt tool to
remove dirt from the contacts in the
battery compartment. Refit the
battery. Switch on the power tool –
if the light emitting diodes still flash,
the power tool is malfunctioning
and must be checked by a servicing
dealer – STIHL recommends an
authorized STIHL servicing dealer.
English
13