JOCCA 2068N Manual De Instrucciones página 6

EN English
- Before using the appliance for the first time, fully charge it. For that,
connect the USB cable to the USB charging port of the fan and connect the
other end to the computer or wireless charger.
- To use the appliance with the grid closed and in the tabletop position. Pull
the grille up, as shown in figure 1 and press the on/off button (6) 1 time
and then press this button again to select the desired speed and close the
grille again.
- To use the appliance with the grille open and in a tabletop position, pull
the grille upwards as shown in figure 1 and open the fan as shown in figure
2. Then turn the locking piece (4) in the direction clockwise until the pattern
on the padlock is aligned with the indicator . See picture 3.
- Press the on/off button (6) 1 time and then press this button again to select
the desired speed.
- To use the appliance in the standing fan position, repeat the process of
opening the grille and opening the fan as mentioned above. Then pull the
extensible tube (3) upwards and choose the desired height.
- Press the on/off button (6) 1 time and then press this button again to select
the desired speed.
CLEANING AND STORAGE
-Do not use abrasive detergents or products that could damage the
appliance. Simply clean the surface with a wet cloth.
-Do not immerse the appliance in water or any other liquid.
-Clean the hair clipper every time it is used to prevent the accumulation of
grease and other remains.
TECHNICAL DATA
3.7V 7200mAh
Battery: Ion Lithium
This product complies with the directives 2014/35 / EU EMC, 2014/30 / EU
LVD, 2011 /65 / EU ROHS
PRODUCT RECYCLING –ENVIROMENT
Do not throw this product in the trash at the end of its useful life. Take it to
a waste collection point, designated for this purpose (subject to the 2012/96
/ EU DEEE directive).
6