Idiomas disponibles
Idiomas disponibles
Operation
Note
Before using the appliance for the first time, clean it
thoroughly as per the instructions given in the chapter
"Cleaning".
➩
Place the bowl 6 in the appliance base 9.
➩
Place the blade holder 5 with the knife 7 on
the mounting 8.
➩
Prepare the items to be processed by cutting lar-
ge pieces to a size that will fit in the bowl 6.
➩
Place the food to be processed in the bowl 6.
Thereby, take note of the following table:
Filling
Foodstuff
quantity
Salami
130 g 2 x 5 secs.
Cheese
(Gouda,
120 g 2 x 8 secs.
young,
refrigerator
temperature)
Onions
100 g
Garlic
Carrots
100 g 3 x 5 secs.
Dried fruit
130 g 2 x 8 secs.
Almonds
150 g
Eggs
150 g 2 x 4 secs.
(hard boiled)
Walnuts
100 g 2 x 8 secs.
Ice cubes
100 g
Processing
SPEED
time
Normal
Turbo
pulsating
Turbo
Normal
Normal
coarse:
1 x 10 secs.
middle:
Turbo
2 x 10 secs.
fine:
3 x 10 secs.
Turbo
Turbo
pulsating
Turbo
➩
Close the bowl 6 with the lid 4: Place it on the
bowl 6 so that the lugs on the lid 4 engage in
the slots on the bowl 6. Then turn the lid 4 so
that the lugs slide unter the slots and the lid 4
locks into place.
➩
Place the motor block 2 on the lid collar 3.
➩
Press the motor block 2 downwards, as shown
in Figure B. The motor starts with the normal
operating speed.
➩
To make use of the higher processing speed
"Turbo", press, in addition to the motor block 2,
the turbo button 1 and keep it pressed down,
as shown in Figure C.
Note
Should larger pieces of the contents collect on the
wall of the bowl while processing, lift the motor
block 2 from the lid collar 3. Shake the bowl 6
vigorously and then continue with the processing.
Remove possible residues with a dough scraper.
With particularly hard foodstuffs, for example block
chocolate, the selection of a pulsatory processing is
recommended. For this, press the turbo button 1
repeatedly for a short time (in addition to the motor
block 2). Should the foodstuff not be completely
pulverised, you can either cut it into smaller pieces
or lift the motor block 2 from the lid collar 3.
Shake the bowl 6 vigorously and then continue
with the processing.
➩
When the contents have been sufficiently chopped,
release the motor block 2 and, if necessary, the
turbo button 1.
➩
Unplug the power cable from the socket.
- 16 -
