Idiomas disponibles
Idiomas disponibles
DT 880 PRO
Thank you for selecting the DT 880 PRO dynamic
studio headphones.
Please take some time to read carefully through this
information before using the product.
ENJOY THE SOUND!
Your beyerdynamic PRO Team
SAFETY INSTRUCTIONS
Risk of injury
u
We would like to point out that excessively
high volumes and long listening times may
cause hearing damage. Hearing defects
always constitute an irreversible impairment
of hearing ability. If you suffer from tinnitus,
do not use headphones or reduce the
volume.
u
According to regulations to protect
employees against damages caused by noise
and vibrations, please follow these
instructions:
85 dB SPL for max. 8 hours
88 dB SPL for max. 4 hours
91 dB SPL for max. 2 hours
94 dB SPL for max. 1 hour
97 dB SPL for max. 30 minutes
100 dB SPL for max. 15 minutes
u
When connecting the headphones, please
ensure that the volume is turned down to
minimum. Adjust the volume after putting
on the headphones.
Danger to life
u
Headphones drastically reduce perception
of external sounds. Using headphones in
road traffic can be potentially dangerous.
The user's hearing must not be impaired to
the extent that it causes road safety risks.
Please also make sure that you do not use
the headphones in traffic, especially within
an area of potentially dangerous machines
and tools.
u
Furthermore, avoid using headphones in
situations where hearing must not be
affected, especially when crossing a
railway crossing or at a construction site.
Liability / intended use
u
Do not use the product for any application which is
not described in this product information.
u
beyerdynamic is not liable for improper use of the
product and its accessories.
DESIGN FEATURES
The DT 880 PRO is a semi-open dynamic headphone
and provides a very linear sound as well as an excellent
sound location. Due to the semi-open design ambient
sound is attenuated, but can be still perceived.
APPLICATION
u
The DT 880 PRO was designed for critical music and
sound monitoring in an open environment especially
for acoustic and classical music.
u
The transducers are fitted to adjustable yokes which
should be positioned to fully enclose the ear. This will
provide the optimum ear/speaker position for accu-
rate sound monitoring.
u
The cord is terminated with a high-quality gold
plated mini-jack and a 1/4" stereo jack adapter.
u
Caution:
Connect the jack connector of the headphone
cable to a headphone socket only! If you connect
the headphones to any other jack socket, the head-
phones could be damaged.
MAINTENANCE
u
As with any equipment which will be used in close
proximity to sensitive areas of the body, it is essential
that the ear pads and headband are kept clean.
Use a damp cloth for cleaning using warm water
only taking care not to allow any water drops into
the ear cups or transducers.
u
If necessary, you can carefully remove the ear pads
and headband pad and clean them with mild soapy
water.
u
WARNING: Never use any solvent cleaning agents!
Furthermore, the pads must be completely dry
before they are attached to the headphone again.
u
WARNING: Never use a vacuum cleaner for cleaning
the headphones, as this may cause irreparable da-
mage.
u
Should it become necessary to replace the ear pads
or the headband pad, refer to "Replacement parts
and Accessories". You can easily do this yourself.
u
If other components have to be replaced, please
contact your local beyerdynamic representative.
3
