Idiomas disponibles
Idiomas disponibles
Connecting the Device
The device is supplied ready for operation.
The 1530 watt motor is equipped with a safety switch. If the plug is disconnected or if a power failure occurs
while the motor is running, the switch toggles to the OFF position.
When changing tools or adding accessories, disconnect the power plug from
the power supply to prevent accidents.
Specific Safety Instructions
Risk of injury to your hands! Do not reach into the machining zone.
Hold the device with both hands.
Always run the cable away from the device and avoid sharp edges.
Risk of injury by hot chips.
Risk of injury by incorrect use.
Never touch tool with the device running.
Always hold device away from body.
Do not carry out overhead work with device.
Wear safety goggles.
Description
The KFK Deburring Device is intended for deburring operation to inner and outer edges, radii and bores from
20mm (=10mm radius).
Designed for steel, stainless steel, aluminium, aluminium alloys, brass and plastics machining jobs, for clean
visible edges and for the preparation of weld seams.
Tool-free adjustment of chamfer height.
Handy and powerful.
Triple cutting insert holder.
For industrial and handiwork purposes.
For producing visible edges in plant and
machine construction.
For use in ship building to remove sharp angles and edges in order to avoid paint chipping (corrosion
protection).
Optional:
Adjustable guidance-stop for outer edge Prod.-No.: 25207
25207
11
