Idiomas disponibles
Idiomas disponibles
General Safety Instructions
Prior to every use, check device, power cable and plug! Do not use device with the switch damaged,
when the device cannot be switched on and off, or when the speed governor of the motor does not
work reliably.
Only connect the plug to the power supply with the motor switched off.
Keep the device away from moisture and do not use in moist conditions.
Do not use the device in the proximity of flammable fluids or gases.
Ensure your workspace is well lit.
Always wear safety goggles.
Mind long hair and jewellery. They may become entangled in the rotating motor shaft.
Do not touch the cutter.
The work piece must be held and fixed tightly during the machining process.
Ensure the power supply cable is flat on the ground. Avoid tripping hazards.
Assume a firm stance when working.
Always disconnect from power supply before working on device or motor.
Protect yourself from electric shock.
Avoid physical contact with grounded parts.
Do not overload the device. Secure and ideal operation of the device is possible within the specified
range of performance of the drive motor only.
Do not use the device for purposes other than specified.
Do not misuse the power cable. Never carry the device by the cable. Never pull the cable when
disconnecting the plug from the power supply.
Protect the power cable from heat, oil, gasoline and sharp edges.
Always have damaged devices repaired by a specialist.
10
