Genebre IG20001-01 Instrucciones De Montaje página 5

A.
Montar una retención en el extremo de cada
conexión flexible sin llegar a apretarlas del todo.
Asegurarse de que la junta con filtro está dentro de la
retención y que no se haya caído.
Assemble a check valve at the end of each flexible
connection without fully tightening them. Make sure
that the filter gasket is inside the check valve in the
correct position and that it has not fallen off.
C.
Roscar las conexiones flexibles en la base del grifo.
La operación se realizará manualmente hasta llegar
al tope. No debe emplearse una llave para asegurar
la conexión.
Screw the flexible connections into the base of the
tap. The operation will be carried out manually until
the limit is reached. A wrench should not be used to
secure the connection.
INSTRUCCIONES DE MONTAJE
ASSEMBLY INSTRUCTIONS
B.
destornillador, y colocar la junta tórica de la base.
Assemble the threaded rod by tightening it with a
screwdriver , and fit the base O-ring.
D.
encimera del lavabo y posicionar el grifo de forma
que quede centrado sobre este.
Insert the connections through the hole in the sanitary
desk and position the tap so that it is centered on it.
Montar la varilla roscada apretándola con un
Introducir las conexiones por el taladro de la
loading