Idiomas disponibles
Idiomas disponibles
Installation (continued)
4
Attaching the shade to the fixture
□
Wrap a rubber gasket (I) around the bottom of the glass shade (H), and
then place glass shade (H) onto fixture ring (J). Wrap an other
rubber gasket (I) around the top of the glass shade (H).
□
Place all arms over the glass shade (H), the fixture ring (J), align
the hole of arm (G) with hole of fixture ring (J).
□
Screw set screw (E) into the aligned holes of
arm (G) and fixture ring (J).
□
Repeat the above for remaining arm (G) and fixture ring (J).
CAUTION: The fixture ring (J) needs to be installed
with the arrow pointing upwards
5
Attaching the mounting strap to the outlet box
□
Screw the nipple (GG) about 1/2 in. into
the screw collar loop (II).
□
Screw the other side of the nipple (GG)
about 3/8 in. into the mounting strap (CC).
□
Tighten the hex nut (FF) against the mounting strap
(CC) to secure the nipple (GG).
□
Attach the mounting strap (CC) to the outlet box (not
included) using the outlet box screws (EE).
6
