HAMPTON BAY 91910 Guía De Uso Y Cuidado

PACKAGE CONTENTS
PLANNING FOR A SUCCESSFUL ASSEMBLY
Read all instructions before assembly and installation.
Inspect each part for defects that may have occurred during shipping.
Keep your receipt and these instructions for proof of purchase.
CHOOSING THE RIGHT LOCATION
Install your solar light in a location with full, direct sunlight. Do not install in shad-
ed areas as these areas will not allow the batteries to fully charge and will reduce
the nighttime operating hours for your light. Ensure that the installation location
is away from other nighttime light sources such as street or porch lamps. These
light sources may prevent your solar light from automatically turning on.
HOW SOLAR WORKS
The solar light has a solar panel that converts sunlight into electricity. During the day, the converted electricity is stored in the rechargeable batteries. At night, the
solar light is powered by the batteries using the electricity stored during the day. The operating time depends on geographical location, daily weather conditions, and
season. For optimal performance during the evening, allow the batteries to charge for 6 to 7 hours in direct sunlight.
Assembly and Installation
1
Preparing for installation
□
FOR FIRST TIME USE: Remove the pull tab between the top cover (A)
and the housing (D).
□
Insert the housing (D) into the top cover (A) and twist to lock.
Use and Care Guide
Solar LED Path Light
A B
A
A
D
C
Part
A
1.2V AA 1000mAh rechargeable
B
C
D
E
F
2
Installing the solar path light in the ground
NOTE: Do not use a hammer. If the ground is hard, use water to soften or a
trowel to loosen the soil.
□
Firmly slide the post (E) into the solar housing (D).
□
Attach the post (E) to the stake (F).
□
Push the assembly firmly into the ground.
1
Please contact
Item #xxxx xxx xxx
Model #91910
D
E
Description
Top cover
battery (pre-installed)
Battery cover
Housing
Post
Stake
D
E
F
for further assistance.
1-855-HD-HAMPTON
F
Quantity
10
10
10
10
10
10
HAMPTONBAY.COM