Idiomas disponibles
Idiomas disponibles
English
Citrus juicer
EASY PRESS 600
DESCRIPTION
A Press cone cover
B Big cone
C Small cone
D Stainless steel filter
E Housing
F Lever
G Juice deposit
H Anti-drip valve
USE AND CARE:
- Fully unroll the appliance's power cable before
each use.
- Do not use the appliance if its accessories are
not properly fitted.
- Do not move the appliance while in use.
- Do not use the appliance if it is tipped up and do
not turn it over.
- Do not turn the appliance over while it is in use
or connected to the mains.
- Store this appliance out of the reach of children
and/or those with reduced physical, sensory or
mental abilities or those unfamiliar with its use
- Any misuse or failure to follow the instructions
for use renders the guarantee and the manufac-
turer's liability null and void.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Cut the citrus fruit/s to be squeezed in half.
- Place a glass under the anti-drip valve.
- NOTE: The anti-drip valve can be opened or
closed as required (Fig.1).
- Turn on the appliance by pushing down with the
pressing handle on the piece of citrus fruit, once
it has been placed on the juicing cone.
- To stop the appliance, simply stop applying
pressure to the cone.
- Remove the cone and strainer assembly in
order to empty the jar.
- NOTE: If you process large quantities of fruit,
you will need to clean the filter and remove the
residual pulp on a regular basis.
- NOTE: The bigger cone is for bigger citrus like
oranges, and you can press with the lever; the
smaller cone is for small citrus like lemon, and
you have to press with your hand directly on the
cone.
- Pulp regulation filter
- This juicer includes a filter that allows you to
adjust the pulp to your liking, to use this filter
you must follow these steps:
- Remove the stainless steel filter
- Place the plastic pulp regulation filter correctly.
- NOTE: To make cleaning process easier, the
pulp filter, which is composed of two pieces,
can be disassembled. To reassemble-it must
be taken into account that the regulator must
be between the two limiting walls and exert
pressure between the two pieces.
- Once you have finished using the appliance:
- Unplug the appliance from the mains.
- Clean the appliance.
CLEANING
- Disconnect the appliance from the mains before
undertaking any cleaning task.
- Clean the motor base with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Never submerge the motor base in water or any
other liquid or place it under running water.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of clean-
liness, its surface may degrade and inexorably
affect the duration of the appliance's useful life
and could become unsafe to use.
- The following pieces may be washed in a dish-
washer (using a soft cleaning program):
- Press cone cover
- Big cone
- Small cone
