Transportation And Storage - PACLITE Equipment TR-800D Manual Del Operador

2. Check and clean the air filter element, re-lube the element in accordance with the engine
manufacturer's recommendations. If operating conditions are unusually dusty and severe, filter
element cleaning should be done more frequently.
3. Check oil level in crankcase of engine and replenish as necessary.
Check the oil level in the ramming cylinder according to the following
procedures:

Make sure that the machine has not been run in the last 10 minutes.

Look through the oil sight-glass. It should be level with the halfway
line. Replenish with the appropriate oil.
Maintenance: Every 50 hours or weekly
Check for loose bolts and nuts. Retighten if necessary.
Maintenance: Every 200 hours
Check the ramming cylinder oil. Do not overfill.
Fuel, Lubricant and Spark Plug
Fuel
Model
Type
TR-800D Diesel

Transportation and Storage

Lifting
Where it is necessary to use lifting equipment to position the rammer, check and confirm that the
rubber isolators on the operation handle is not damaged or cracked. If they are cracked or damaged,
replace the rubber isolators before attempting to lift the machine. Also make sure that the lifting
equipment has a WLL (Working Load Limit) suitable for the rammer's weight. Attach suitable chains or
slings ONLY to the lifting point on top of the rammer's operating handle.

NEVER leave the engine running whilst transporting or moving the TR Rammer, even if it is only a
short distance.

The height of the operating handle can be adjusted within the range of 850 ~ 880 mm. Loosen
three bolts at each side of the operating handles base, and retighten them at the desired handle
height. Note that when the handle is set too high, excessive vibration may be transmitted through
the handle.
10
Engine Crankcase
Capacity Type
SAE
3L
10W - 40
Ramming Cylinder
Capacity Type
SAE
400ml
10W - 40
Spark
Plug
Capacity
900ml N/A