Idiomas disponibles
Idiomas disponibles
REATTACHING THE REFRIGERATOR DOORS
4. Connect the water line (
on the coupler with pulling tube. Connect the one
connector (
) on left side door, the other connector
4
(
) on right side door and two connectors (
7
each side of the top cap.
The clip is enveloped inside of the top cap.
5
5. Position the top table (
screws into the top table, and tighten with a philips
screw driver (+). Open the door, reinsert the cap top
table (
) and close the doors.
1
When reattaching the top table, make sure that the
wires are not pressed or damaged by the hinge cover.
After assembling, close the door and check to see
whether the door has gaps between gaskets or is
tilted. If they are, please refer to "Adjusting the level" on
page 15.
DA68-01926A-10.indb 13
) and then insert a clip
5
) at
3
) in place. Insert the 3
2
3
4
2
1
3
7
Setting Up _13
13. 4. 24.
11:37
