Idiomas disponibles
Idiomas disponibles
3) Hold down the trigger and keep it pressed. Press the POWER switch again.
4) Maintain the trigger pressed for more than 10 s.
5) Release the trigger when you hear the motor turning.
6) The electric motor rotates during calibration. When the motor stops turning the calibration is
complete.
7) Reassemble the blades as indicated in chapter 15.3
16. Pruner Storage
The most important thing to keep in mind before storing your pruner's lithium ion batteries is to make
sure that the batteries are fully charged up. Storing your battery pack for long extended periods with
little or no charge will damage your battery and void your warranty.
•
Ensure that the battery is fully charge.
•
Avoid storing the device in extremely hot or cold environments.
•
If the device will not be used for a long time, remove the battery before storing it.
•
Batteries and chargers must be placed in a secure location prevent heat, dust and moisture from
entering.
•
Batteries should be stored in a dry environment.
Recommended storage temperatures:
• The battery and flammable matter must be kept at least 5-feet apart.
• In order to ensure the service life of the equipment and to prevent its degradation, it must be stored
with enough battery power.
• When not in use, charge the battery at least once every 4 months.
17. Alarm signals
Have your power tool serviced by a qualified repair person using only identical parts for replacement.
This will ensure the safety of the power tool.
Beeps
1 short note
1 long note
1 short note
1 long note
2 short notes
44
Storage less than 1 month
Storage less than 6 month
Storage over 6 month
Interval
0.1 second
0.3 second
0.1 second
0.3 second
0.05 second
-20°C ~ +60°C
-10°C ~ +35°C
0°C ~ +30°C
Indication Description
Start up
Shutdown
