Operation Of Your Blood Pressure Monitor; Inserting The Batteries - Microlife Advanced Manual De Instruccion

MLUBPT0-AP-APC-MAR06-1
b) Upper arm cuffs:
Type S101 for arm circumference 22-33.7 cm or
Type S102 for arm circumference 30.5-40.64 cm
Please Note:
Arm circumference should be measured with a measuring tape in the middle of the relaxed
upper arm. Do not force cuff connection into the opening. Make sure the cuff connection is
not pushed into the AC adapter port. If the cuff is too small, call Microlife for further infor-
mation at 1-800-568-4147.

4. Operation of your blood pressure monitor

4.1. Inserting the batteries

After you have unpacked your device insert the batteries. The battery compartment is locat-
ed on the back side of the device (see illustration).
a) Remove cover as illustrated.
b) Insert the batteries (4 AA, 1.5 V), following the
indicated polarity. (+ -)
c) If the low battery indicator appears in the dis-
play, the batteries are discharged and the unit
will not function.
d) If batteries are inserted incorrectly, the display
may function erratically or not at all.
Check battery polarity.
4/5/06 9:36 AM
9.5" - 13.25" (included)
12" - 16" (order as a special accessory/included
with Model #3BT0-APC)
Page 7
+ +
+ +
Low Battery Indicator
+ +
+ +
6