Maintenance
Cleaning
Surface of the washer
Use a soft cloth with a nonabrasive household cleaner. Do not spray water onto the washer.
Mesh filter
Clean the mesh filter of the water hose once or twice a year.
NOTE
If a mesh filter is clogged, the "4C" information code appears on the washer's display screen.
46
English
Untitled-1 46
1. Turn off the washer, and then unplug the power cord.
2. Close the water tap.
3. Loosen and disconnect the water hoses from the
back of the washer. Cover the end of each hose with a
cloth or towel to prevent water from gushing out.
4. Use pliers to pull out the mesh filter from the inlet
valves.
5. Thoroughly clean the mesh filters in water.
6. Completely dry the mesh filters. Do not dry in direct
sunlight.
7. Reinsert the mesh filters, and then reconnect the
water hoses.
8. Open the water taps.
2021-11-25
3:16:38