5. INSTALLATION AND USE
5.1 Safety instructions
ELECTRICAL HAZARD
Danger from electric current!
• No contact with heat sources should take place with the power cord.
• Cord should not hang over edge of table or counter.
• Do not pour water into an appliance that is in operation or is still hot.
• The device must be properly connected and comply with the regulations in force.
WARNING
In operation, the device can reach high temperatures. To avoid burns and accidents, do not use the device
in malfunction, and do not use spare parts that are not original.
ELECTRICAL HAZARD
Danger from electric current!
If incorrectly installed, the device can be dangerous and cause injury. Before any installation, check the data
of the electrical network. Connect the device only when there is compliance. The appliance must be unpacked
and checked completely before connection by a professional.
5.2 Use
WARNING
The set-up of the device installation and maintenance must be carried out by professionals only.
• Do not leave the appliance running without supervising it.
• During use, your hands should be dry.
• Do not move or tilt the device during operation.
MANUAL
1. Before use:
Connect the showcase to 200-240V, exclusive outlet.
As soon as the device is cold, put your hand on the air intake to confirm that it is cold enough.
You can then put the food in the display case.
2. Digital temperature controller
LED refrigerant
It is an intelligent controller integrated and applicable to the Hp compressor.
The main functions are: temperature display / temperature control / defrost
automatic off / light control / storage value / self test / parameter lock
Front panel operation
1. Set the temperature
Press the SET button, the set temperature is displayed.
Press the
or
Press the button
to exit
the setting and display the showcase temperature
2. If you press no other button within 10 seconds, the room temperature
cold is displayed
button to modify and save the displayed value.
Defrost LED
ES