Idiomas disponibles
Idiomas disponibles
SPECIFICATIONS
Model
Operating pressure
Dimensions
Length × Height × Width
Weight
Magazine type
Nail capacity
Air consumption
Air inlet
NAIL SELECTION
Be sure to use only the genuine HITACHI nails for the NV45AE/NV45AE(S). The use of any other nails can result in
tool malfunction and/or nail breakdown, leading to serious injuries.
Only nails shown in the Table below can be driven with this Nailer.
Wire-collated coil nails
ACCESSORIES
Accessories other than those shown below can lead to malfunction and resulting injuries.
STANDARD ACCESSORIES
9-27/32" × 10-3/8" × 5-1/64"
(250 mm × 264 mm × 128 mm)
Top loading
WARNING
Min.
.413"
(10.5mm)
.120"
(3.05mm)
WARNING
1 Eye protection
2 Allen wrench for M5 screw
3 Allen wrench for M4 screw
— 9 —
NV45AE
70 – 120 psi (4.9 – 8.3 bar 5 – 8.5 kgf/cm
5.5 lbs (2.5 kg)
120 nails (1 coil)
3
.046 ft
/cycle at 100 psi
(1.3 ltr/cycle at 6.9 bar)
(1.3 ltr/cycle at 7 kgf/cm
3/8 NPT Thread
1
2
3
1
1
1
NV45AE(S)
2
)
9-27/32" × 10-3/8" × 4-7/8"
(250 mm × 264 mm × 124 mm)
Bottom loading
2
)
Max.
.413"
(10.5mm)
.120"
(3.05mm)
English
