Maintenance and care
Observe the following precautions when checking and maintaining your product after use:
Turn the engine off and do not attempt to check or maintain the product until the engine has cooled.
You could burn yourself.
Remove the spark plug cap before performing checks and maintenance.
An accident could occur if the product starts unexpectedly.
Checking and maintenance requires specialist knowledge. If you are unable to check and maintain the product or deal with a
fault yourself, consult your dealer. Do not attempt to dismantle the product.
Servicing guideline
Area
Air filter
Fuel filter
Spark plug
Carburettor
Cooling system
Silencer
Silencer
Starter
Fuel system
Screws, bolts and nuts
* Or 100 hours, whichever occurs first.
Time intervals are maximum. Actual use and your experience will determine the frequency of required maintenance.
Carburettor has been correctly adjusted in factory. Do not readjust yourself unless it is necessary. It should be readjusted by
dealer.
Maintenance and care
If you have any questions or problems, please contact your dealer.
Cleaning air filter
IMPORTANT
Maintenance
Clean/Replace
Inspect/Clean/Replace
Inspect/Clean/Adjust/Replace
Adjust/Replace and adjust
Inspect/Clean
Inspect/Tighten
Clean
Inspect
Inspect
Inspect, Tighten/Replace
IMPORTANT
Maintenance and care
WARNING
Page
18
19
20
-
19
-
19
-
20
-
Clean air filter (A) after each use.
1.
Close choke, remove air cleaner cover (B), grids (C), air fil-
ters. Then check and/or clean air filters by washing in a suit-
able solvent when heavily soiled.
2.
Dry filters before reinstalling.
18
Before use
•
•
•
•
•
•
•
NOTE
Monthly
•
•
•*