Idiomas disponibles
Idiomas disponibles
Always lift pans off the ceramic glass – do not slide, or they may scratch the glass.
Using your Hob
To start cooking
•
After power on, the buzzer beeps once, all the indicators light up for 1 second then
go out, indicating that the hob has entered the state of standby mode.
1. Touch the ON/OFF
2. Place a suitable pan on the cooking zone that you
wish to use.Make sure the bottom of the pan and the
surface of the cooking zone is clean and dry.
3. Touching the heating zone selection control, and an
indicator next to the key will flash.
4. Select a heat setting by touching the power level control.
•
If you don't choose a heat setting within 1 minute, the hob will automatically
switch off. You will need to start again at step 1.
•
You can modify the heat setting at any time during cooking.
When you have finished cooking
1.
Touching the heating zone selection that you wish to
switch off.
2.
Turn the cooking zone off by touching "-". Make sure the display shows"0".
switch. all the indicators show "– "
10
