Fault Detection - Pressalit Care R4660 Instrucciones De Uso Y Mantenimiento

Fault Detection

If the bracket ceases to work, check whether there is
anything preventing its movement. If not, please refer to the
following sections:
Fault
Bracket will not work, even
though the operating handle
is used correctly (for model
with electric motor).
Bracket will not work, even
though the operating lever
is used correctly (for model
with gas cylinder).
Bracket will not lock in a
given position (for model
with gas cylinder).
Contact Pressalit Care or the dealer if the fault cannot be
corrected. Do not attempt to repair the product. Doing so
may invalidate the guarantee.
CE
The CE mark indicates that this product has been
manufactured in accordance with Directive
2007/47/EC of 5 September 2007 on medical
devices and subsequent amendments.
Information on disposal and recycling
Electrical and electronic equipment (EEE) contain materials,
components and substances which can be dangerous and
hazardous to human health and the environment, when the
waste of electrical and electronic equipment (WEEE) is not
disposed of correctly.
Waste of electrical and electronic equipment must
not be disposed of along with unsorted domestic
refuse, but must be collected separately.
Cause
Fault in electricity supply.
Moving parts obstructed.
Bracket not adjusted
correctly.
Correction
Check all wires and plugs
are intact and fitted
correctly in accordance with
installation guide.
Disconnect plug, check
fuse (3.15 amps), replace if
necessary.
Check for obstructions to
moving parts.
Contact an authorised
electrician for further checks
if necessary.
Check transport protection
is removed.
Adjust cable until correct
11
function is achieved.
11
7