Pressalit Care R4660 Instrucciones De Uso Y Mantenimiento página 6

8
9
10
6
Maintenance
• We recommend running the motors in the height-
adjustable bracket to maximum positions at least once a
week. I.e.: raise and lower bracket to maximum to ensure
internal parts are lubricated.
Service
We recommend an annual inspection and service is
performed by the supplier.
Procedure for bracket with electric motor:
1: Remove end and front piece.
2: Check wall mountings and tighten if necessary.
3: Check all moving parts for wear.
4: Remove any dirt using a cloth.
5: Apply lubricant with a brush. Raise and lower wash
basin until the lubricant is evenly distributed – apply
more if necessary.
6: Check feed and waste pipes.
7: Check all electrical connections to control box.
8: Carefully replace and secure covers.
9: Write a report for the customer of any defects found.
Procedure for bracket with gas cylinder:
1: Remove end and front piece.
2: Check wall mountings and tighten if necessary.
3: Check lock system.
4: Check feed and waste pipes.
5: Remove any dirt using a cloth.
6: Apply lubricant with a brush. Raise and lower wash
basin until the lubricant is evenly distributed – apply
more if necessary.
7: Carefully replace and secure covers.
8: Write a report for the customer of any defects found.
Procedure for manual bracket:
1: Remove end and front piece.
2: Check wall mountings and tighten if necessary.
3: Check lever lock.
4: Check feed and waste pipes.
5: Carefully replace and secure covers.
6: Write a report for the customer of any defects found.
8
9
10