A.
B.
C.
D.
E.
F.
INDICATOR LIGHTS
Stops automatically
Stops automatically
when door is
when bin is full.
Empty bag when
opened. Symbols
bag full indicator
flash alternately
lights up
CAPABILITIES
Will shred: Paper only
Will not shred: Adhesive labels, continuous form paper, transparencies,
newspaper, junk mail, credit cards, CD/DVDs, staples, paper clips,
cardboard, laminates, file folders, X-rays or plastic other than noted above
Paper shred size:
High Security Micro-Cut....(Din 6) 1/32 in. x 3/16 in. (0.8mm x 5.0mm)
ADVANCED PRODUCT FEATURES
Auto Oil™
Lubricates the cutters automatically to enhance
performance and extend shredder life
• Keep away from children and pets. Keep hands away from
paper entry. Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair,
etc. – away from shredder openings. If object enters top
opening, switch to Reverse (R) to back out object.
15
• Never use aerosol products, petroleum based lubricants or
other flammable products on or near shredder. Do not use
15
canned air on shredder.
• Do not use if damaged or defective. Do not disassemble
shredder. Do not place near or over heat source or water.
15
2
G.
H.
Stops automatically
if too much
paper is inserted.
Automatic reverse
if paper jams
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
KEY
A. Safety Flap
B. Paper entry
C. Disconnect switch (open door)
D. Door
E. Basket - paper (inside)
F. Casters
G. See safety instructions
Stops automatically
Overload protection.
if safety flap is
Machine stops to cool
opened. Symbols
down- approx. 10-15
flash alternately
minutes. Symbols
flash alternately
Maximum:
Sheets per pass .................................................................................10*
Paper entry width ...........................................................12 in. (305mm)
* 8.5 in. x 11 in., 20lb., (75g) paper at 120V, 60 Hz, 15Amps; heavier
paper, humidity or other than rated voltage may reduce capacity.
Recommended maximum daily usage rates: 5,000 sheets per day. 10
sheets per pass.
* In order to perform at capacity, shredder must be plugged into
a dedicated 20Amp, 120V outlet and auto oil system must
be engaged.
Sleep Mode
Energy saving feature shuts down
the shredder after 1 hour of inactivity
• This shredder has a Disconnect Power Switch (C) in the door. The door
must be closed to operate shredder. In case of emergency, open door.
This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Shredder must be plugged into a properly grounded wall outlet or
socket of the voltage and amperage designated on the label. The
grounded outlet or socket must be installed near the equipment and
easily accessible. Energy converters, transformers, or extension cords
should not be used with this product.
• Do not operate the machine without the safety flap closed (A).
Model HS-1010
H. Control Panel and LEDs
1. ON/OFF
R 2. Reverse
3. Bin full
4. Door open
5. Safety Flap Open
6. Low oil
7. Auto oil complete
Cutting shafts are
Oil bottle is empty
automatically oiled
ENGLISH