Create COOL DC Manual Del Usuario página 9

You will hear a beep sound when you press the button on the fan or remote control
every time.
ON / OFF
Fan: To start fan operation press the button panel. Tap the panel to cycle
from fan speed 1 – 9. Hold down the button panel for 2 seconds and a
buzz will sound, release the panel and the fan will stop operation.
Remote control: The fan also can be turned on/off by using the remote
control.
TIMER
Remote control: Press this button to set the timer off from 1 to 8 hours. 0 refes to timer off
(with 2 beep souds).
• The other functions of the fan still can be used after the timer function is set.
• The fan will stop running when the set time is up. Press the power button again if you
need to restart it.
• After the fan power is turned off, the timer setting will also be cancelled.
LOW AIR FLOW
Remote control: Press this button on the remote control, LED button will show L, and the
wind turns to be soft. Press wind speed button + - to exit this mode.
STRONG AIR FLOW
Remote control: Press this button on the remote control, LED button will show H, and the
wind turns to be strong. Press wind speed button + - to exit this mode.
SWING
Fan: Press the button for 1 second to start swing. Press it again for 1 second and remove
the hand after hearing one beep sound to stop the swing.
Remote control: Swing function also can be operated by the remote control.
• When the remote control is not in use, put it on the remote control shelf at the top. There
is a magnet inside to hold the remote control.
Caution: The fan power is not completely turned off if you just turn off the power button
on either the fan or the remote control. If you do not use the fan for a long time, unplug it.
FUNCTIONS
ENGLISH 9