Idiomas disponibles
Idiomas disponibles
4
4.1-4.2. Mark the pre-drilled holes of the wall tracks (E) onto the wall, and then remove the assembled shower frame from the base.
4.3. Using a ø1/4" (6mm) drill bit, drill guide holes at the marked location.
4.4. Insert the wall anchors (CC) using a rubber mallet until the wall anchors are flush with the wall.
4.3
ø1/4"
6mm
SHOWER FRAME INSTALLATION
4.1
WARNING!
If there are no studs aligned to the wall
track behind the drywall, use the wall
anchors to ensure the screws won't
become loose.
4.2
4.4
CC
P. 40
