Idiomas disponibles
Idiomas disponibles
ATTENTION! Please note, the manometer (6) is not calibrated! After
inflation, always check the tire pressure immediately, for example, at a
petrol station.
Not suitable for inflating automotive tires
▪
Ensure that the ON/OFF switch (1) is set to "O".
▪
Press the lever quick coupler (9) downwards to attach it.
▪
Place the lever quick coupler (9) onto the valve and then release the lever.
▪
Insert the mains plug (4) of the compressor into a mains power socket.
▪
Switch the ON/OFF switch (1) to "I".
▪
Read the air pressure from the manometer (6).
▪
Switch the ON/OFF switchto (1) "O" as soon as the correct or permissible air pressure has
been reached.
▪
Press down the lever quick coupler (9) and pull it off the valve.
▪
Remove the mains plug (4) from the mains power socket.
6.3.2
Using the valve adapter (13)
Sclaverand valve, race valve
Dunlop valve, bicycle valve
Area of use:
The valve adapter (13) facilitates easy inflation of bicycle tires.
▪
Use the valve adapter (13) to pump to the valves shown above.
▪
Connect the valve adapter (13) into the lever quick coupler (9) and then release it.
▪
Start by pressing the valve adapter (13) onto the valve.
▪
Inflate as described above.
Copyright © 2022 VARO
POWX1706
P a g e
| 9
EN
www.varo.com
