Idiomas disponibles
Idiomas disponibles
drop in line voltage resulting in loss of power and
overheating. The following table shows the correct
size to use depending on cord length and nameplate
ampere rating. If in doubt, use the next heavier
gauge. The smaller the gauge number, the heavier
the cord.
Minimum Gauge for Extension Cords (AWG)
(when using 120 V only)
Total Length of Cord in Feet (me-
Amp Rating
Not
More
25' (7.6
More
Than
m)
Than
0
6
18
6
10
18
10
12
16
12
16
14
Keep the extension cord clear of the working area.
Position the cord so that it will not get caught on lumber,
tools, or other obstructions while you are working with
the product. Failure to do so can result in serious
personal injury.
This product has a polarized plug (one blade is wider
than the other) as a feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician.
Never use an extension cord unless the plug can be
fully inserted. Do not alter the plug.
5
POWER TOOL USE AND CARE
•
If operating a product in a damp location is
unavoidable, then the product should only be
connected to a circuit that is protected by a ground-
fault circuit-interrupter (GFCI). Use of a GFCI
reduces the risk of electric shock.
•
Keep out of reach of children.
•
Avoid direct eye exposure. Do not direct the light
beam at persons or animals and do not stare into
the light beam yourself (not even from a distance).
The product can cause flash blindness.
English
ters)
150'
50' (15
100'
(45m)
m)
(30 m)
16
16
14
16
14
12
16
14
12
Not Recommen-
12
ded
6
BATTERY TOOL USE AND
CARE
•
Disconnect the battery pack from the product before
making any adjustments, changing accessories, or
storing power tools, etc.
•
Recharge only with the battery charger specified by
the manufacturer. A battery charger that is suitable
for one type of battery pack may create a risk of fire
when used with another battery pack.
•
When battery pack is not in use, keep it away from
other metal objects like paper clips, coins, keys,
nails, screws, or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause
burns or a fire.
•
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or
burns.
•
Do not use a battery pack or product that
is damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
•
Do not expose a battery pack or product to fire
or excessive temperature. Exposure to fire or
temperature above 265°F (130°C) may cause an
explosion.
•
Follow all charging instructions and do not charge
the battery pack or appliance outside of the
temperature range specified in the instructions.
Charging improperly or at temperatures outside of
the specified range may damage the battery and
increase the risk of fire.
•
Recharge only with the battery charger specified by
the manufacturer. A battery charger that is suitable
for one type of battery pack may create a risk of fire
when used with another battery pack.
•
Use only with specifically designated battery packs.
Use of any other battery packs may create a risk of
injury and fire.
7
FCC REQUIREMENT
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received,
including interference that may cause undesired
operation.
WARNING
Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate the equipment.
5
EN
