Idiomas disponibles
Idiomas disponibles
Function > Trigger
Trigger
35
Configures the output of Trigger terminal.
Off
On(Power)
On(V-Stretch)
Function > Test Pattern
Test Pattern
36
Display 6 types of test patterns. For checking the color condition and tone, and the pixel size. Use whenever necessary.
●
This can also be displayed by the remote control. (
Function > Off Timer
Off Timer
37
Automatically powers off when there is no operation for a certain duration.
Off
1 hour
2 hours
3 hours
4 hours
Function > High Altitude Mode
High Altitude Mode
38
Selects this when using the projector in a location of low atmospheric pressure (higher than 900 meters above sea level).
On
Off
Information
Input
Source
Resolution
H Frequency
V Frequency
Deep Color
Lamp Time
Downloaded From projector-manual.com JVC Manuals
All manuals and user guides at all-guides.com
Do not activate.
Move the screen UP/DOWN in conjunction with the power.
Operate the anamorphic lens in conjunction with the "V-Stretch".
P14)
Disables the off timer.
Auto power off after 1 hour.
Auto power off after 2 hours.
Auto power off after 3 hours.
Auto power off after 4 hours.
Enable.
Disable.
Displays the currently selected video input.
Displays the type of the current video input signal.
(If PC signal is input, this item cannot be displayed)
In the case of PC signal, the resolution is displayed.
In the case of PC signal, the horizontal frequency is displayed.
In the case of PC signal, the vertical frequency is displayed.
Displays the bit depth (color depth) of the video signals input from the HDMI terminals.
[Deep Color is not displayed when Y Cb Cr (4:2:2) is input.]
Displays the accumulated hours of usage of the light-source lamp.
ENGLISH
41
