Idiomas disponibles
Idiomas disponibles
28 DVD to Videotape Duplication
Follow the steps below to copy a DVD to a videotape.This will
be possible only if the DVD is not copy protected.
Before you begin:
●
Put a videotape in the cassette compartment. Make sure the
tape's record tab is intact and the tape is long enough to record
the DVD.
●
Put the DVD you want to copy in the disc tray.
●
Press VCR so VCR light appears on the front of the DVD/VCR.
●
Turn on the TV and set it to the correct Video In channel.
(Check your TV owner's manual for details.)
1
Press INPUT repeatedly until "DISC" appears on
the TV screen.
2
Press SPEED repeatedly until the desired tape
speed (SP or SLP) appears briefly on the screen.
Details about tape speed are on page 57.
3
Press REC
to start recording. "REC" will appear
I
on the display panel.
4
Press DVD. Press PLAY B to play the disc.
●
To pause the recording, press VCR, then press
PAUSE k once. "REC" will flash.
●
To resume recording, press REC
again. "REC" will reappear.
●
To stop recording, press VCR, then press STOP C.
All manuals and user guides at all-guides.com
DISC
or press PAUSE k
I
OPEN/CLOSE
1
2
3
4
5
6
TRACKING
7
8
9
CLEAR
TITLE
+10
0
VCR
SETUP
DVD
1
DISC
INPUT
MENU
OK
REW
PLAY
FFW
STOP
PAUSE
BACK
DISPLAY SUBTITLE
ZOOM
AUDIO
ANGLE
SEARCH REPEAT
REPEAT
3
REC
SPEED
MODE
TIMER SET
2
Helpful Hints
• A Timer Recording or Satellite
Link is not available during DVD
to videotape duplication.
• You cannot copy a DVD to a
videotape if you are using
Progressive Scan.
4
A B
