Idiomas disponibles
Idiomas disponibles
16 Disc Playback
Before you begin, turn on the TV, Stereo and other equipment
connected to the DVD/VCR. Make sure the TV and the Stereo
(if applicable) are set to the correct channel.
Details are on pages 8-12.
1
Press y to turn on the DVD/VCR.
2
Press DVD so DVD light appears on the front of
the DVD/VCR.
3
Press OPEN/CLOSE
4
Place a disc onto the tray. If the DVD is recorded on
only one side, place the disc on the tray with the label
facing up and the shiny side facing down. Some DVDs are
recorded on both sides. Make sure the label of the side you
want to play is facing up.
5
Press PLAY B to close the tray. The tray will close
and playback will begin. If playback does not start
automatically, press PLAY B again.
If a DVD Menu appears instead, see page 32.
To play MP3, Windows Media
pages 43-44.
You also can close the tray by pressing
OPEN/CLOSE A.
●
Press STOP C to stop playback.
REMINDER: This DVD/VCR
will play only certain discs.
See page 7 for details.
All manuals and user guides at all-guides.com
to open the disc tray.
A
TM
Audio or JPEG files, see
OPEN/CLOSE
1
2
3
4
5
6
TRACKING
7
8
9
CLEAR
TITLE
+10
0
VCR
SETUP
DVD
DISC
INPUT
MENU
OK
REW
PLAY
FFW
STOP
PAUSE
BACK
4
Insert a disc.
Helpful Hints
• An "X" may appear at the top right
corner of the TV screen when you
try a feature. Either the feature is
not available on the disc, or the
DVD/VCR cannot access the
feature at this time. This does not
indicate a problem with the
DVD/VCR.
• If a disc is dirty or scratched, the
picture may appear distorted or
playback may stop. In such cases,
remove the disc and turn off the
DVD/VCR. Disconnect the power
cord, then reconnect it. Clean the
disc, then turn on the DVD/VCR
again and reinsert the disc for
playback.
• If a disc has multiple layers, the
picture may freeze occasionally. This
happens when the first layer
switches to the second layer. This is
not a malfunction.
• When the DVD or CD light
appears on the display panel, the
disc is loaded and ready for
playback.
• When you press OPEN/CLOSE A
or PLAY B (DVD) on the front of
the DVD/VCR when the power is
off, the DVD/VCR will turn on in
DVD mode. Otherwise, the
DVD/VCR will turn on in the mode
in which it was turned off.
• If you use PLAY B to close the disc
tray,playback starts automatically.If
you use OPEN/CLOSE A to close
the disc tray,you have to press
PLAY B to start playback.
1
3
2
5
