General Troubleshooting - TECshow STRATUS 1000 Manual De Usuario

7. GENERAL TROUBLESHOOTING

No output or short output
Fuse keeps blowing
Product does not power up
Product stops pumping/ Loud
noise
solutions presented here, contact AMPRO Technical
Support.
P. 10
Tecshow Stratus 1000 |
English version
Blocked pipes
Failing part
Excessive load on the circuit
Short circuit along the power lines
No energy on power outlet
Loose or damaged power cord
Blown fuse
Internal problem
Low/NO Fluid
and then turn it back on. Repeat
as necessary.
tempts, contact Customer Service.
Clean thoroughly with AMPRO
FCQ. For full instructions, see
Clean thoroughly with AMPRO
FCQ. For full instructions, see
Contact Customer Service
Contact Customer Service
Make sure that the total load does
not exceed 80% of the breaker or
fuse nominal current
Check the power lines and power
cords
Check power outlet
Change to another outlet
Check the power cord
Replace blown fuse with a good
one of the same type and rating
Send product for repair
-