Warn Works 1700 Manual Del Usuario página 8

Winch Installation to fixed location
Failure to observe these instructions could lead to minor or moderate injury.
Always choose a mounting location that is sufficiently strong to withstand the loads you
intend to winch
The 1700 can be mounted to a fixed
location by utilizing the mounting hole
pattern for the winch unit. First, choose a
mounting location that is sufficiently strong
enough to withstand the loads you intend
to winch.
Next, drill two hole to the dimensions
specified in the drawing below.
To secure the winch, always use:
A flat, secure mounting location at
▫
least 3/16 in. (4.8 mm) thick steel.
5/16 in. flat washer x 2.
▫
5/16 in. lockwasher x 2.
▫
5/16-18 x 1in. long, hex head
▫
capscrew, Grade 5 or better x 2.
Torque mounting bolts to 12 ft-lbs
▫
(16.3 Nm).
Bolt length may need to be longer that
specified above depending upon the thickness
of the material the winch is mounted to.
Caution
Winch Failure Hazard
3.1"
[78.7 mm]
PAGE 8
5/16" [7.94 mm] DIA (2 plcs)
73054 Rev. D0