Rack-Mounting Kit - Phonic IS16v1 Manual Del Usuario

34. VGA Connector
This VGA connector is available for customers to connect external
computer monitors to their IS16. This will allow you to view the
IS16's user interface on a large screen. Customers can enter
the Utility menu to adjust the aspect ratio of the screen's signal.
35. USB Mouse Connector
Connect any mechanical or optical USB mouse to this connector,
allowing for adjustment of GUI properties when an external monitor
is in use. In addition to pointing and clicking, the mouse will allow
you to adjust the levels of virtual rotary controls by hovering the
curser over the control and adjusting the scroll wheel.
36. Ethernet Connection
Use this RJ45 connection to connect to your local computer
network. This will allow users to control the IS16's software via a
HTML5 protocol on any PC, Mac or tablet.
In addition to pointing and clicking, the mouse will allow you to
adjust the levels of virtual rotary controls by hovering the curser
over the control and adjusting the scroll wheel.
37. WiFi
Connect a Wifi dongle to this USB port to access any local wireless
network. As is the case with the Ethernet connection, this will allow
remote operation of the GUI via the network.
37
34
38. Power Button
Use this button to turn the IS16 on and off.
39. DC Power In
Connect the DC head of the included power supply to this port. The
other end of the power supply should be connected to a suitable
AC power source. When connecting the DC head of the power
supply to the IS16, ensure to lock it into place using the retaining
clip to ensure the supply is not inadvertently removed.
40. Expansion Card Slot
This slot is for the FireWire + USB expansion card.
41. 12V Lamp Socket
This XLR socket is for the connection of the optional 12V
gooseneck lamp. This allows the illumination of the face of the
mixer when operating in dark areas..
41
39
IS16

Rack-mounting Kit

1. Remove the IS16's side-panels by unscrewing the six
2. Slide the side-panels towards the front of the unit to unlock
3. Attach the rack ears and screw them into place.
35
36
40
38
screws holding them in place.
them.
5