Idiomas disponibles
Idiomas disponibles
Fig. 4
Aluminum shaft
4. Lock the aluminum shaft with the locking knob (Fig. 5).
Fig. 5
Shaft joints
Fitting the Safety Guard
m
WARNING!
The safety guard must be properly installed.
The guard provides the operator and other bystanders with
some protection from thrown objects.
1. Lay the trimmer on the ground with the trimmer head
facing upward.
2. Place the safety guard on the metal bracket and align with
the 4 mounting holes. Secure the safety guard to the metal
bracket with the screws provided (Fig. 6).
Fig. 6
Safety guard
Metal bracket
NOTE: Never use the tool unless the safety guard is properly
fitted.
Cable
Shaft
joints
Locking
knob
Locking knob
Safety guard
screws
Trimmer head
Fitting the Auxiliary Handle
1. Flip the auxiliary handle lock up to release the handle lock.
(Fig. 7).
Fig. 7
Flip up to
unlock
2. Slide the auxiliary handle onto the base plate. Make sure
the tabs on both sides of the auxiliary handle slide into the
slots on the base plate. Push until it clicks into position
(Fig. 8).
Fig. 8
Base plate
Slot
Tab
3. Adjust the auxiliary handle to a comfortable working
position. Lock the auxiliary handle by flipping the handle
lock down (Fig. 9).
Fig. 9
Flip down
to lock
Auxiliary
handle lock
9
Upper
aluminum shaft
Auxiliary
handle lock
Auxiliary
handle
