Idiomas disponibles
Idiomas disponibles
Fig. 13
Height adjustment lever
3. Insert the lever into the desired slot.
7-Position Height Adjustment (From front to rear):
(1) 1.2 in. (30 mm)
(2) 1.6 in. (40 mm)
(3) 2.0 in. (50 mm)
(4) 2.4 in. (60 mm)
(5) 2.8 in. (70 mm)
(6) 3.1 in. (80 mm)
(7) 3.5 in. (90 mm)
4. Reinsert the batteries and the safety key to the lawn
mower and resume normal use.
Starting + Stopping
m
WARNING!
Before switching on the mower, make sure
that it is not in contact with any foreign objects. Keep your
hands and feet a safe distance away from the rotating mower
blade and the ejector opening. Failure to comply with these
warnings can result in severe personal injury.
IMPORTANT: Do not start the mower in tall grass.
1. Make sure the unit's switch lever is not squeezed on.
Insert the batteries and the safety key in their slots
(Fig. 14). Close the battery compartment cover.
Fig. 14
2. To start the machine, press and hold the safety lock button
while pulling the switch lever toward you (Fig. 15).
m
a brief period after the unit has been switched off. Do not tilt or
carry the unit while the motor is still running and do not touch
the blade while it is still rotating. Failure to comply could result
in severe personal injury.
Using the Self-Propelled System
The cordless lawn mower is equipped with a variable-speed
self-propelled system, which is independent and can be
operated without the blade rotation. For example, when you
have completed cutting your lawn, you can use the
self-propelled system to propel the mower back to your
storage location without blade rotation. Or you may choose to
operate the mower as a non-self-propelled mower to maximize
battery run time.
To operate the self-propelled system without blade rotation,
push and hold the self-propel lever to the handle. To turn off
the self-propel system, release the self-propel lever (Fig. 16).
The system has variable speeds. Adjust the speed by turning
the speed-adjusting dial as shown (Fig. 16).
Battery packs
Safety key
13
Fig. 15
Switch lever
Safety button
3. Once the machine powers on, release the safety lock
button and proceed with operation.
4. To stop the mower, release the switch lever.
WARNING!
The mower blade will continue to rotate for
Fig. 16
Speed-adjusting
dial
Reduce the
speed
Self-propel lever
Increase
the speed
