Idiomas disponibles
Idiomas disponibles
5. Adjust headrest height so that the bottom of the
headrest is even with the top of the child's shoulders.
6. Place harness straps over child's
shoulders and insert buckle clips
into buckle until they 'click' into
place ❺.
!
ENSURE that harness clips and
buckle are properly fastened by
gently tugging on each.
!
ENSURE that the straps are NOT
twisted.
!
DO NOT use child restraint if
harness does not lock.
7. Re-fasten chest clip ❻.
8. Tighten harness system by gently
pulling on the up-front harness
adjuster strap until all slack is
removed from the system ❼.
!
ENSURE straps are flat and snug
against child's shoulders and thighs.
You should NOT be able to slide
more than one finger between the
strap and the child's shoulder ❽.
A snug strap should not allow any
slack. It lies in a relatively straight
line without sagging. It should not
press the child's flesh or cause your child's body to be in
an unnatural position.
9. Position the chest clip at mid-chest, in line with your
child's armpits and away from your child's neck.
❺
❻
❼
❽
36
