Idiomas disponibles
Idiomas disponibles
Blowing Function
Leave the ashes to completely cool down prior to blowing them!
1. Check if the device is assembled well before using it.
2. To use this blow function, connect the hose to the blowing connection.
3. Insert the power plug into the mains socket.
4. Switch on the device.
5. Switch off the device after use.
6. Unplug the device from the mains.
7.
Cleaning and Maintenance
•
Always unplug the device before starting any cleaning and maintenance activity.
•
Clean the filter frequently. The frequency depends of the type of ashes you vacuum. Types
of ashes can differ. For some types of ashes, you will need to clean the filter more often
than for other types.
•
Take off the filter and clean it with water. Let it dry afterwards. Do not use a dry cleaner of
a hair dryer to speed up the drying process of the filter. Never mount a damp filter into the
ash cleaner!
•
Never clean the device with water but use a damp cloth to remove dirt.
•
Never use flammable or caustic products to clean the device.
•
Please contact your local dealer when you need spare parts for this appliance. Always
mention the specific serial number, which is mentioned on the rating label of the device.
8.
Technical Specifications
power supply .................................................................................. 220-240 V~, 50-60 Hz
power consumption ................................................................................................1200 W
capacity .................................................................................................................... 20 L
sound level ............................................................................................................. 76 dB
suction .................................................................................................................. 18 kPa
flexible pipe ............................................................................................................... 1 m
aluminium tube .................................................................................................... 230 mm
power cable ............................................................................................................ 1.5 m
Use this device with original accessories only. Velleman Group nv cannot be held
responsible in the event of damage or injury resulting from (incorrect) use of this
device. For more info concerning this product and the latest version of this manual,
please visit our website www.perel.eu. The information in this manual is subject to
change without prior notice.
© COPYRIGHT NOTICE
The copyright to this manual is owned by Velleman Group nv. All worldwide rights
reserved. No part of this manual may be copied, reproduced, translated or reduced to any
electronic medium or otherwise without the prior written consent of the copyright holder.
V. 02 – 22/03/2022
TC90601
8
©Velleman Group nv
