Zanussi ZFC639WAP Manual De Instrucciones página 18

Idiomas disponibles
  • ES

Idiomas disponibles

Problem
Customer Service
If your appliance is still not working properly after making
the above checks, contact the nearest service centre.
To obtain fast service, it is essential that when you apply
for it you specify the model and serial number of your
appliance which can be found either on the guarantee
certificate or on the rating plate located on the external
right side of the appliance.
Replacing the lamp
1.
Technical data
Volume (gross)
Litre
Volume (net)
Litre
Rated Power
Watt
Voltage
Volts
Further technical information are situated in the rating plate on the external right side of the appliance.
Installation
Positioning
Warning! If you are discarding an old appliance that
has a lock or catch on the lid, you must ensure that
it is made unusable to prevent young children being
trapped inside.
Important! The appliance shall have the plug accessible
after installation.
18
All manuals and user guides at all-guides.com
Possible cause
There is no voltage in the mains socket
(try to connect another appliance into
it).
378
Height
mm
368
Width
mm
140
Depth
mm
230
Weight
Kg
Call an electrician.
Disconnect the mains plug from the mains socket.
2. Replace the lamp with one of the same power (the
maximum power is shown on the lamp cover).
3. Connect the mains plug to the mains socket.
4. Open the lid. Make sure that the lamp comes on.
868
Rising Time
1600
Energy Consumption
665
Freezing Capacity
69
Climatic Class
This appliance can be installed in a garage or cellar, but
for optimum performance install this appliance at a loca-
tion where the ambient temperature corresponds to the
climate class indicated on the rating plate of the appliance:
Solution
hours
29
kWh/24h
0,792
kg/24h
29
SN/N/
ST
loading