Idiomas disponibles
Idiomas disponibles
3. When water boils, the kettle the power indicator light will automatically turn off.
Note: You can also turn the appliance off at any time by lifting the ON/OFF (I/O)
switch to the OFF (O) position.
Warning: Kettle filled with boiling water is hot. Use only the handle to pick it up.
Be careful to avoid spilling water on the power base.
When taking kettle to the table, carry kettle with caution to avoid spilling. Set it on a
trivet or hot pad to protect the table surface or tablecloth.
Important: Hold kettle handle firmly when pouring, especially when filled to the
max fill line. Do not pour too fast.
4. Unplug the kettle when not in use.
Note: This kettle has a boil dry protection feature that automatically turns the kettle
and power indicator light off when water has boiled or if there is no water in the
kettle.
Note: After boiling water, do not touch the heating element tube that is inside the
kettle. The heating element retains heat.
BUILT-IN SCALE PROTECTION
Note: Lime scale forms over time in the kettle when water is heated. Though
harmless, it may be bothersome. The kettle has a removable filter behind the pour
spout to prevent particles from pouring into your beverage.
• Always have the removable filter in place just behind the spout when using the kettle.
Care and Cleaning
This product contains no user serviceable parts. Refer service to qualified service
personnel.
CLEANING
1. Before cleaning, be sure the base is unplugged and the kettle has cooled completely.
Empty any remaining water from the kettle.
2. Pull out the removable filter for cleaning. Wash the filter in hot, soapy water and
rinse or place it in the utensil holder of the dishwasher.
3. Wash the inside of the kettle with hot, soapy water and rinse.
Important: Never immerse the kettle in water or other liquids or place in a
dishwasher.
4. Wipe exterior of the kettle and base with a damp cloth or sponge and dry.
Note: The heating element at the bottom of the interior may discolor over time. This
will not affect performance. Do not use abrasive soaps, cleansers, or scouring pads on
the kettle.
Note: Over time, the kettle may heat up but will not boil. When this happens, it is
time for descaling.
To Descale
• Fill kettle with 4 cups cold tap water and bring to a boil.
Add 2 cups white vinegar, let stand for at least 1 hour or overnight and discard.
• Fill kettle to maximum fill line with cold water. Bring to boil, discard and repeat.
Kettle is now ready for use.
5
