Idiomas disponibles
Idiomas disponibles
11
DC Circuit Breaker - The circuit protector may be reset
by pushing the button of the protector.
Parallel Operation Outlets - These outlets are used
12
for connecting two FIRMAN inverter generators for
parallel operation. A FIRMAN parallel kit(optional
equipment) is required for parallel operation.
12V DC outlet – 8.3 Amp of DC current may be drawn
13
from this receptacle.
Use this outlet to charge 12V automotive type
batteries ONLY. See 12V DC outlet (Battery
Charger) section.
Ground Terminal – Consult an electrician for local
14
grounding regulations.
Outlet Cover - Protect the receptacles from dust
15
and debris.
Fuel Valve Knob
16
Choke Button
17
Recoil Stater
18
12V DC Battery Charger Port - Plug the 120 Volt
19
AC charger into this port to charge the generator
battery.
English
Battery Cable Connection
Follow below instruction to connect battery to
the generator:
1.Unscrew the maintenance cover by provided
screwdriver.
2. Cut wire tie that is binding the black battery
cables A and B.
3. Insert the male connector of cable A into
female connector of cable B.
4. Reattach the maintenance cover.
Page 09
Customer Service: 1-844-FIRMAN1
