FITFIU FITNESS MC-90 Manual Usuario página 44

USING THE PRODUCT
SAFETY TETHER AND EMERGENCY STOP
The equipment comes with a "safety tether" (A). The safety tether must be
attached to the console for the equipment to run. It is designed to attach
to your clothing so that if you leave or fall from the equipment it will stop
automatically, helping prevent injury.
Before beginning a workout session, ensure that the safety tether is properly
placed onto the console and that the clip is securely attached to your clothing.
NOTE: If the equipment is on, but the safety tether is not attached, "E07" shows on the display
and the equipment cannot be started.
BELT PLATFORM INCLINATION
The MC-90 features 3-position belt platform inclination. This means that end of the belt platform can be raised/
lowered in three positions. The lower the end of the belt platform compared to the front provides a more strenuous
workout. To adjust belt platform inclination:
NOTE: Always adjust both sides of the belt platform to the same height.
1. Ensure that the equipment is OFF and unplugged.
2. Lift one side of the belt platform (1), then pull the locking pin (2) out
from the foot (3).
3. Rotate the foot, as required, then insert the locking pin into the
required hole (the hole farthest from the belt platform provides the
most inclination). Ensure the pin passes through the hole on either
side of the foot.
4. Perform the same operation on the other side of the belt platform.
5. Ensure that the belt platform is resting on both feet before using
the machine.
CONSOLE AND FUNCTIONS
44
A
1
3
2