Idiomas disponibles
Idiomas disponibles
Force pairing with receiver
C: After plug the receiver, you will hear "Di" sound, pairing successfully,
green light is on.
Real-time mod
In real-time mode, the scanned data is directly transmitted to the computer
by wire or wirelessly. After the transmission is successful, the scanner will
emit a low-frequency short tone, and the green indicator will flash once.
If the transmission fails, 3 low frequency short tones are issued to alert.
The green light flashes 3 times.
In real-time mode, if the transmission fails, the scanned barcode will be lost.
Enter real-time mode
Warehousing mode
Warehousing mode is recommended if the scanner is operating outside
of the wireless transmission range. In warehousing mode, the scanned
data is stored in the scanner's internal storage. In the storage mode, after
scanning a bar code, the scanner will emit a short tone (the frequency
is low first and then high), and the green light flashes once, and the
scanned bar code is automatically stored in the scanner memory. If the
internal memory is full, the scanner will emit 3 low-frequency short tones
to alarm, at the same time, the green light flashes 3 times.
Enter inventory mode
Check the number of barcodes stored in the warehouse by scanning the
"Show Total Storage Items" barcode.
Show count total entries
Upload warehousing data by scanning the "Data Upload" barcode. After
the data is uploaded, the barcode stored in the scanner will not be de-
leted automatically. The user uploads the warehouse data multiple times
by scanning the "data upload".
16
