IMPORTANT SAFEGUARDS
When using electrical appliances, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and/or
injury to persons, including the following:
1. READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE.
2. Do not touch hot surfaces. Use handles or knobs. When brewing,
keep brew basket lid closed.
3. To protect against electric shock, do not immerse cord, plugs or
machine in water or any other liquids.
4. Close adult supervision is necessary when this appliance is used by
or near children.
5. Unplug from outlet when not in use and before cleaning. Allow to
cool before putting on or taking off parts and before cleaning the
appliance.
6. Do not operate any appliance with a damaged cord or plug, or
after the appliance malfunctions or has been damaged in any
manner. Return this appliance only to the nearest Authorized
Service Center for examination, repair or adjustment.
7. The use of accessory attachments not recommended for
®
MR. COFFEE
products may cause hazards or injuries.
8. Do not use outdoors.
9. Do not let cord hang over edge of table or countertop or to touch
hot surfaces.
10. Do not place this appliance on or near a hot gas or electric burner
or in a heated oven.
11. To disconnect, or stop brew cycle before completion, grasp the
molded plug and unplug from electrical outlet.
12. Do not use appliance for other than its intended use.
13. Use on a hard, flat, level surface only, to avoid interruption of air
flow underneath the appliance.
14. When in use, keep unit away from edge of counter.
15. Do not operate the unit unless the pitcher has the lid in place and
the pitcher is snug against the machine.
16. Never reheat beverage by passing it through the brewing system.
17. Pitcher Use and Care
The pitcher may break if the following instructions are not followed:
a. This pitcher is designed for use with this iced tea maker and thus
must never be used on a rangetop or in any oven, including
microwave ovens.
b. Do not use a cracked pitcher.
c. Do not clean the pitcher with cleansers, steel wool pads or other
abrasive materials.
d. Avoid sharp blows, scratches or rough handling.
18.
Warning: To reduce the risk of fire or electric shock, do not
remove any service covers. No user serviceable parts inside.
Repair should be done by authorized personnel only.
BVMC-TM33_15ESM1.indd 3-4
2
19. Scalding may occur if the pitcher is moved or lid is removed during
the brewing cycles.
Additional Precautions When Using The Iced Tea Maker
•
Place the appliance well back from the edge of the counter.
•
Avoid appliance areas which may become hot or emit steam
when the iced tea maker is on, particularly the steeping/brew
basket and the water reservoir.
•
The top lid must be closed at all times while the appliance is
brewing.
•
DO NOT operate the iced tea maker unless the pitcher has its lid
on and is fitted snugly against the appliance.
•
DO NOT move the appliance while in use or until it has cooled
off. Steam may escape from the steeping/brew basket while the
appliance is cooling.
•
DO NOT place a tablecloth or other fabric underneath the
appliance or otherwise restrict airflow beneath it.
•
DO NOT jerk or pull on the power cord when unplugging the
appliance, grasp the molded plug to unplug it.
•
Never reheat a beverage by passing it through the appliance's
brewing system.
•
DO NOT immerse the appliance in water. This may cause
electrocution or shock, damage it permanently and void the
warranty.
Special Cord Set Instructions
1. A short power supply cord is provided to reduce the hazards
resulting from a person or pet becoming entangled in, or tripping
over, a longer cord.
2. An extension cord may be used if care is exercised in its use.
3. If an extension cord is used, the marked electrical rating of the
extension cord must be at least 10 amps and 120 volts. The
resulting extended cord must be arranged so that it will not drape
over a countertop or tabletop where it can be pulled on by
children or tripped over accidentally.
4. This appliance has a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the
outlet, reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.
SAVE THESE INSTRUCTIONS
3
3/27/15 10:39 AM