Idiomas disponibles
Idiomas disponibles
How to Control Your Dehumidifier
All the basics you need to know!
Disclaimer: Pump and WiFi features are only available on select models.
1.
When first operating the dehumidifier, run it in Continuous mode for 24 hours.
2.
Press the Power button once to manually turn the unit on. Press the Power button once more
to turn the unit off.
3.
Humidity Selection – Press the "down" or "up" buttons to choose the desired relative
humidity. Once the preferred humidity is selected, the display will show the actual room %
humidity. Each press of the same button will change the desired room humidity by 5%. The
room humidity is selectable from 35% - 80%, or continuous. The until will cycle on and off
to maintain the humidity level chosen on the digital display. If you want the dehumidifier
to operate continuously regardless of the room humidity, press the mode button until you
see "CO" on the digital display. This will enable continuous operation and the "Continuous"
indicator will light up on the control panel.
4.
Fan Speed – press the Fan Speed button to cycle through the different fan speeds (High,
Low). The fan speed can be visually distinguished by the fan speed indicators on the
control panel.
5.
Timer Auto On – Press the Timer button. Once the Timer indicator begins to flash, press the
up and down arrows to choose how long the unit waits before turning on (set time from 0.5
to 24 hours).When you have the desired time displayed on the screen, wait 5 seconds for the
command to register and the timer light to turn on. Press the Timer button again to cancel
the Timer, and the light will disappear
6.
Timer Shut Off – When the appliance is running, select the Timer button. Once the Timer
indicator begins to flash, press the up and down arrows to choose how long the unit waits
before turning off (set time from 0.5 to 24 hours). When you have the desired time displayed
on the screen, wait 5 seconds for the command to register and the timer light to turn on.
11
