Idiomas disponibles
Idiomas disponibles
Replacing the fuse
If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.
Before replacing the fuse, unplug mains lead.
Procedure:
Step 1: Unscrew the fuseholder on the rearpanel with a fitting screwdriver from the housing (anti-
clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device will be damaged, it has to be replaced by authorized dealers only in
order to avoid hazards.
If defective, please dispose of the unusable device in accordance with the current legal regulations.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Smoke-output:
Warm-up time:
Fluid consumption:
Output volume:
Tank capacity:
Sound-control:
Number of LEDs:
Dimensions (LxWxH):
Weight:
Fuse:
Please note: Every information is subject to change without prior notice. 03.12.2009 ©
230 V AC, 50 Hz ~
530 W
approx. 4 m
approx. 4 min.
approx. 21 ml/min.
approx. 50 m³/min.
1.5 l
via built-in microphone
60
340 x 220 x 250 mm
4 kg
F 4 A, 250 V
19/35
00046274.DOC, Version 1.1
