Idiomas disponibles
Idiomas disponibles
UPGRADE
The MC 400 include a OTA (Over The Air) upgrade opportunity. The App show if a update is available and let
you choose to install. Please follow the App instructions for installation.
Note: The OTA upgrade is only for WLan and LAN functionalities.
CONNECTING THE DEVICE TO A BLUETOOTH AUDIO SOURCE
Select Bluetooth input. If you have previously connected a Bluetooth device, the MC 400 will automatically
attempt to re-establish a connection with this device. If this is the case, you may be required to manually
reconfirm the connection on the source device.
If a connection has not already been made or the connection cannot be re-established, the MC 400 will
automatically activate the ‚pairing mode'. Bluetooth Pairing appears in the display.
Now activate the Bluetooth mode on your source device. The MC 400 will appear in the list of Bluetooth
devices as „MC 400". If it is not displayed in the list, set your source device to search for Bluetooth
devices manually and make sure that the MC 400 has been switched to the pairing mode.
Depending on the source device, you may be asked whether the password is to be accepted during the
pairing procedure. You can confirm this by simply pressing „Accept". If you are still asked for a password,
use the default passwords „0000" or „1234". If you are asked if you want to establish a connection after
pairing, please select „Yes". After successful pairing and connection, the name of your paired device, for
example, will be displayed.
The MC 400 supports the „Qualcomm® aptX™ HD" high quality audio transmission standard. If your
source device also supports this standard, „Qualcomm® aptX™ HD" will be selected automatically as the
transfer mode when establishing a Bluetooth connection.
PRESET MEMORY
The device is equipped with two independent PRESET memories for FM and DAB stations. Each memory
can store up to 40 stations.
Storing stations:
Set the desired DAB or FM stations using the TUNING buttons on the unit or via the remote control.
• Select the desired storage location by holding down the corresponding key on the numeric keypad.
• In the case of two-digit storage location numbers (10 – 40), the +10 key first has to be pressed for a
longer time and the desired digits then entered.
• Successful storage is confirmed on the display with the appearance of STORED PRESET. In the first
line, the storage location number is played permanently before the station frequency.
E.g. "Program slot 01 for FM RDS"
ERFT
Pop Music
P01
105.80MHz
Select a station from the list of stations:
Select the desired storage location via the numerical keyboard (by pressing briefly).
RDS (RADIO DATA SYSTEM)-FUNCTION OF THE TUNER (FM ONLY)
RDS is a system which provides information about FM stations that is broadcast together with the
station's signal. The MC 400 can also present this information (about the station, broadcast, etc.) in the
display.
DAB FUNCTIONS OF THE TUNERS (DAB ONLY)
The DAB transmission system provides further data and information that can be displayed by pressing
the DISPLAY button (on the remote control):
• Station name (always displayed)
• DLS (Dynamic Label Segment): Shows station information and messages (e.g. title and artist of the
current song, news messages, other information about the current programme or station)
• Programme type (e.g. pop, news, classical)
• DAB multiplex number and frequency of the current station
• Time / Date
• Bit rate of the current audio signal
• DAB multiplex name
SERVICE AND TECHNICAL PROBLEMS
If you should encounter any technical problems, please contact your specialist dealer or
Magnat Audio-Produkte GmbH, www.magnat.de.
22
