Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7

Enlaces rápidos

INSTRUCTIONS & PARTS LIST FOR SAP10A, SAP10S & SSP10S POLISHERS
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow these Safety Instructions!
Power tools can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear protection be worn when the
tool noise level is below 85 dBA. See the tool's information sheet for the noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop using tool and consult a
physician. See the tool's information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Rotating polishing pads can cause cuts and abrasions.
Keep hands and other body parts away from polishing pads to prevent cutting or pinching. Wear protective clothing and gloves
to protect hands.
Contact with rotating polishing pads can cause injury.
Polishers present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool and accessories. Do
not wear jewelry, loose clothing, or neckwear around power tools. Keep work area clear of cleaning rags and all items that could
become entangled with the tool.
Entanglements can cause injuries.
Polishing operations creates dust.
Do not breathe sanding dust. Use approved mask.
Breathing polishing dust can cause injury.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits. When drilling into walls, be aware that they may have hidden electric wires.
Electric shock can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Polishing metals creates sparks that can ignite flammable materials and vapors.
Only sand metals if the area is free of combustible or explosive materials or vapors.
Explosions and fire can cause injury.
Backing pads rotating at excessive speed can burst.
Check the speed printed on the backing pad. This speed must be greater than the nameplate speed of the polisher. Do not
exceed rated operating air pressure.
Bursting backing pads can cause injury or death.
Polishers are not guarded for use with grinding wheels or cut off wheels.
Never mount a grinding wheel or cutoff wheel on a polisher.
Unguarded grinding wheels and cut off wheels can cause injury.
Polishers can generate unexpected movement.
Keep a firm grip on the tool at all times. Be sure your body position allows you to have control of the tool at all times. Make sure
your footing is secure. When possible, secure the work piece in a vice or with clamps.
Unexpected tool movement can cause injury.
Using excessive force on a tool makes it hard to control.
Do not force tool.
Hard to control tool can cause injury.
Taping or wiring the throttle valve in the "ON" position will prevent the tool from shutting off if the tool should jam or malfunction or if
anything unexpected happens.
Do not wire or tape down the "On-Off" valve of any power tool.
Tools that are prevented from shutting off can cause injury.
250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com
Form ZCE845
Read and understand these instructions before operating this tool.
SAVE THESE INSTRUCTIONS!
When used improperly power tools can create hazardous situations.
Improperly used power tools can cause injury or death.
POLISHER SAFETY
Original
Instructions
SERIAL"A"
WARNING
1
Form ZCE845
Date 2021June9/E
Page 1 of 28
2021June9/E
Date
Tabla de contenido
loading

Resumen de contenidos para SIOUX SAP10A

  • Página 7: Traducción De Las Instrucciones Originales

    Traducción De Las Instrucciones Originales INSTRUCCIONES Y LISTA DE PARTES PARA PULIDORES SAP10A, SAP10S & SSP10S SERIE “A” Lea y entienda estas instrucciones antes de usar esta herramienta. ¡NO PIERDA ESTAS INSTRUCCIONES! ADVERTENCIA Una herramienta motorizada puede ser peligrosa si no se usa correctamente.
  • Página 8 El arranque inesperado de la herramienta podría provocar una lesión. La herramienta podría funcionar de forma impredecible si no se utilizan los accesorios que distribuye o recomienda Sioux Tools. Utilice sólo accesorios distribuidos o recomendados por Sioux Tools.
  • Página 9: Lubricación

    No aplique demasiada lubricación ya que el aceite podría contaminar la superficie de la pieza de trabajo. Para muelas rectificadoras de ángulo Aplique 2 porciones de grasa SIOUX #1232 en el cabezal en ángulo después de cada 8 horas de funcionamiento.
  • Página 26 SAP10S227, SAP10S327, SSP10S605-11 Número de serie: MXXX XXXX Numero di serie: MXXX XXXX Marque déposée: Sioux El objeto de la declaración que se describe L’oggetto della dichiarazione sopra indicata è conforme Numéro de série: MXXX XXXX anteriormente cumple con la legislación sobre alle norme comunitarie armonizzate in materia: L’objet de la déclaration décrit ci-dessus est en...
  • Página 28 WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. WARNUNG Der durch Elektrosanden, -sägen, -schleifen und -bohren sowie durch andere Bauarbeiten anfallende Staub enthält Chemikalien, die nachweislich Krebs sowie Geburts- bzw.

Este manual también es adecuado para:

Sap10sSsp10s

Tabla de contenido