Idiomas disponibles
Idiomas disponibles
Dimmer Curve
=
Dimmer Response
=
Red Shift
=
PWM-Frequency
=
Color Calibration
=
Autolock
=
Fan
=
Fan
=
Factory Reset
=
UC/Loops Reset
=
Linear
Exponential
Dimmer curve
Logarithmic
S-Curve
LED
Dimmer response
Halogen
Accurately mimics the
No
colour drift of dimming a
halogen spotlight. When
dimming the spotlight,
the colour temperature
Dim To Warm
changes automatically to
increasingly warm white
and amber (and vice
versa).
600 Hz / 1200 Hz /
LED PWM frequency
2000 Hz / 4000 Hz /
6000 Hz / 25k Hz
RAW - Off
RAW - Adjust
(Individuelle, betriebs-
artübergreifende
Anpassung von R, G,
B, und W mit Werten
von jeweils 000 bis
Colour calibration
255)
Calibrated
Smart Calibration
On
Automatic locking of the
controls
Off
Auto
Off
Fan setting
Constant Low
Constant Medium
Fan setting
Constant High
Restore factory settings
(without resetting user
Reset Now?
colours and loops)
Reset the user colours
Reset User Colors/
and loops to factory
Loops
settings
Light intensity increases linearly with DMX value
Light intensity can be finely adjusted at lower DMX
values and broadly adjusted at higher DMX values
Light intensity can be broadly adjusted at lower
DMX values and finely adjusted at higher DMX
values
Light intensity can be finely adjusted at lower and
higher DMX values and broadly adjusted at medium
DMX values
Light responds abruptly to changes in DMX value
Light behaves like a halogen spotlight with slight
brightness changes
Colour drift is disabled
Colour drift is enabled
Configuration of LED PWM frequency
R, G, B and W with maximum value 255
Press middle encoder = switch between R+G and
B+W (colour) Rotate middle encoder = set value
of R or B
Press right encoder = one level up in menu
structure (ESC)
Rotate right encoder = set value of G or W
Press left encoder = confirm and save settings
Factory calibration of R, G, B and W (across all
modes). Select this setting for the correct display of
colour shades and presets in the standalone modes
CCT and Gel, as well as when controlling CCT and
the presets Gel via DMX.
Merge Factory (calibrated) and RAW calibration
Automatic locking of the controls after approxima-
tely 30 seconds of inactivity. Display shown upon
attempted use: "Locked!"
Unlock: Simultaneously press the centre and right
encoders for approx. 3 seconds
Automatic locking of the controls is disabled
Automatic fan control
Deactivated fan with greatly reduced brightness
Constantly low fan speed with reduced brightness,
if necessary
Constant average fan speed with reduced bright-
ness, if necessary
Constant high fan speed
Reset to factory settings:
confirm with ENTER, cancel with ESC
Reset to factory settings:
confirm with ENTER, cancel with ESC
13
