Dremel 8240 Instrucciones De Funcionamiento Y Seguridad página 18

1605A000BA 11-21 8240.qxp_8240 11/9/21 1:05 PM Page 18
Service
Preventive maintenance performed by
un au thorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recom mend that all tool
service be performed by a Dremel
Service Center.
Disconnect tool and/or charger from
power source before servicing.
Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased
significantly shorter running time
between charges then it is time to
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
Other accessories are not designed for this
tool and may lead to personal injury or
property damage.
Store accessories in a dry and temperate
environment to avoid corrosion and
deterioration.
The number and variety of accessories for
the Rotary Tool are almost limitless. There
is a category suited to almost any job you
might have to do and a variety of sizes and
shapes within each category which en ables
you to get the perfect accessory for every
need.
The accessory categories are as follows;
carving / engraving, routing, grinding /
sharpening, cutting, cleaning / polishing,
sanding, grout removal, drilling and collets /
miscellaneous.
Maintenance
To avoid accidents, always disconnect the tool and/or charger from the
power supply before servicing or cleaning.
NO USER SERVICE -
ABLE PARTS INSIDE.
SERVICE MEN:
tool performance
Dremel Accessories
Use only Dremel®
branded accessories.
D.C. Motors
The motor in your tool has been
engineered
dependable service. To maintain peak
efficiency of the motor, we recommend
it be examined every six months. Only a
genuine Dremel replacement motor
specially designed for your tool should
be used.
Cleaning
damage plastic parts. Some of these
are: gasoline, car bon tetrachloride,
chlorinated cleaning solvents, ammonia
or and household detergents that contain
ammonia.
Ventilation openings and switch levers
must be kept clean and free of foreign
matter. Do not attempt to clean by
inserting pointed objects through
opening
For a complete Dremel rotary accessory
guide please visit -
dremel.com/documents/20812/597949/bit-
guide-poster.pdf
18
for many hours
Certain cleaning
agents and solvents
of