Idiomas disponibles
Idiomas disponibles
ENGLISH GB
IMPORTANT SAFETY INSTRUCTIONS
Read through all the instructions
before starting to use the appliance. Keep
this manual in a safe place for future
reference.
These instructions are also available on our
website. Please visit www.hot-europe.com.
• This appliance must only be operated
as instructed in this user manual.
• This appliance can be used by children
aged from 8 years and above and
persons with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and understand the hazards
involved. Children shall not play with
the appliance. Cleaning and user
maintenance shall not be made by
children without supervision.
• Children of less than 3 years should
be kept away unless continuously
supervised. Children aged from
3 years and less than 8 years shall only
switch on/off the appliance provided
that it has been placed or installed in
its intended normal operating position
and they have been given supervision
or instruction concerning use of the
appliance in a safe way and understand
the hazards involved. Children aged
from 3 years and less than 8 years
shall not plug in, regulate and clean the
appliance or perform user maintenance.
• CAUTION — Some parts of this product
can become very hot and cause burns.
Particular attention has to be given
where children and vulnerable people
are present.
• The heater must not be located
immediately below a socket outlet.
• Do not use this heater in the immediate
surroundings of a bath, a shower or a
swimming pool.
•
DO NOT COVER WARNING: In
order to avoid overheating, do not
cover the heater with anything, as
indicated by the symbol. This can lead
to overheating, fire or electric shocks.
Ensure that the air intake and outlet
vents are not obstructed.
• The appliance is intended only for
use indoors, not for outdoor use or
commercial use.
• Do not use the appliance anywhere near
easily flammable gases or substances
such as solvents, lacquers, glues, etc.
Some of the internal parts can be hot
and could throw sparks.
• Keep flammable materials at least
1 meter away from the heater. To
prevent burns, do not allow bare skin to
come in contact with hot surfaces.
• If the supply cord is damaged, it must
be replaced by the manufacturer, its
service agent or similarly qualified
persons in order to avoid a hazard.
• Never touch the unit with wet hands.
• Check for any obstructions. If you
find an obstruction, turn off the
heater using the power button on
the control panel. Allow the heater
to cool completely, then remove the
obstruction. Wait at least 10 minutes,
then turn on the heater and follow the
instructions for use.
4
COMPONENTS
(See pages 2-3)
1. Mechanical switch on/off
2. Pivot head
3. Control panel:
A. Power button
B. Heat temperature
C. Fan button
D. Timer button
E. Selectable oscillation
F. Adjustable thermostat
4. Cool Touch Plastic Housing
5. 360° Tip Over Protection
SET UP
The Honeywell TurboForce™ Heater Fan requires no assembly. Simply unpack
heater and save all packaging materials for off-season storage.
Place the heater on a firm, level, open surface free from obstructions and at
least 1 meter away from any wall or combustible material.
DO NOT use on an unstable surface such as bedding or deep carpeting.
BE SURE THE HEATER IS NOT IN A POSITION WHERE IT MAY BE
TRIPPED OVER BY CHILDREN OR PETS.
MOVING THE HEATER
This heater is equipped with a recessed carrying handle for your convenience.
Turn off the heater.
Allow it to cool for ten minutes.
Unplug heater and move.
OPERATING INSTRUCTIONS
NOTE: NEVER LEAVE AN OPERATING HEATER UNATTENDED
• Turn heater on by pressing the mechanical switch button which is at the
back of the heater (Fig. 1). Then press the Power button visible on the panel
(
). The power indicator will illuminate and the heater will start in the LO
heat level setting.
• When turning on the heater, this one is automatically set to shut off after
8 hours. This is a safety feature. If you should NOT want the heater to
automatically shut off after 8 hours, simply press the Timer button (
until the Continuous heat icon (
) illuminate on the top of the control
panel.
• To select a Heat Setting, press ( ):
1. For Low ( ), this setting uses 800 watts of power
2. For High ( ), this setting uses 1600 watts of power
NOTE: Because the Low ( ) setting does not require as much electricity
to operate, it is more energy efficient and may be a better option if you are
concerned about saving energy.
• To use the Fan only (no heat), press the Fan button (
).
• To set the thermostat, continue to press the Heat Level button ( ) until Auto
is illuminated. There are 4 pre-set comfort settings from which to choose:
18°, 21°, 24°, 27°. Continue to press the Heat Level button to select your
desired room temperature setting. The heater will operate at HIGH heat in
order to reach this desired temperature.
NOTE: If the Current Temperature is higher than your Desired Temperature,
the heater will be off until the room temperature falls.
• To set the Timer, press the (
) button to select 1, 2, 4, or 8 hour setting.
The heater will run for that chosen period in the selected mode and
automatically shut off after the desired time has passed.
• The TurboForce™ Heater is also equipped with both a pivoting head and
an innovative selectable oscillation feature to provide heat flow how and
where you want it most.
3 WAY PIVOT (Fig. 2) – the head of the heater can be adjusted up at
3 different angles - 15°,30°,45° - to provide more focused heat flow within
the room.
ENGLISH GB
The first pivot angle (15°) - allows the heat to flow more directly at a seated
level. The second pivot angle (30°) - provides heat flow at a standing level.
The third pivot angle (45°) – directs heat flow towards the ceiling. This angle
is ideal to help generate whole room heat circulation.
3 WAY OSCILLATION – the TurboForce™ Heater has been engineered to
include an unique selectable oscillation feature which allows for an even
more customized approach to heat circulation.
• The 60° oscillation angle provides heat flow within a more focused area.
• The 90° oscillation angle allows for wider area coverage.
• The 120° oscillation angle covers more of the room, providing a whole room
heat circulation experience.
SAFETY FEATURES
The Honeywell TurboForce™ Heater is equipped with several devices and
features for added protection:
• A 360° tip-over switch that disables the heater if it is tipped in any direction.
• A high temperature safety sensor prevents overheating.
• This heater is also equipped with a thermal cut-off fuse that will
permanently shut down the heater should it operate at a higher than normal
temperature. If activated, the unit will need to be replaced.
• This heater was built using a high temperature plastic and has a cool to
touch housing and handle.
• This heater is designed with thermal insulated wiring for heat resistance
and reinforced wire connections to help protect against loose connections.
CLEANING AND STORAGE
It is recommended that the Honeywell TurboForce™ Heater be cleaned at
least once a month and before off-season storage.
1. Turn Off (
) the panel, allow the heater to complete it's 10 second cool
down phase. Then, switch off the switch at the back, then unplug the
heater. Allow unit to sit for 10 minutes.
2. Use a dry cloth only to clean the external surfaces of the heater. DO NOT
USE WATER, WAXES, POLISHES OR ANY CHEMICAL SOLUTION.
3. Before storing, clean the TurboForce™ Heater using the above-
mentioned steps. Wrap the cord around the unit. Place in its original box
and store it in a cool, dry place.
This heater does not disassemble.
)
DISPOSAL
This appliance complies with EU legislation 2012/19/EU on end of
life recycling. Products showing the 'Crossed Through' wheeled bin
symbol on either the rating label, gift box or instructions must be
recycled separately from household waste at the end of their useful
life.
Please DO NOT dispose of appliance in normal household waste. Your local
appliance retailer may operate a 'take-back' scheme when you are ready to
purchase a replacement product, alternatively contact your local government
authority for further help and advice on where to take your appliance for
recycling.
GUARANTEE
Please read all instructions before attempting to use this device. Please
retain the receipt as proof of and date of purchase. The receipt must be
presented when making any claim within the relevant guarantee period.
Any claim under the guarantee will not be valid without a proof of purchase.
Your device is guaranteed for three Years (3 Years) from date of purchase.
This guarantee covers defects in materials or workmanship that occur under
normal use; defective devices meeting these criteria will be replaced free of
charge.
The guarantee DOES NOT cover defects or damage resulting from abuse or
failure to follow the user instructions. The guarantee becomes void if the
device is opened, tampered with or used with other parts or accessories,
or if repairs are undertaken by unauthorised persons.
Accessories and consumables are excluded from any warranty.
5
